DISASSEMBLY AND REASSEMBLY
3-10. Multi Duct (Freezer)
Part Name
Multi Duct
(Freezer)
Description
1. Disassemble the INSULATION
DUCT after remove the tape.
2. Disassemble the Electrically-
driven DAMPER after
disassemble the INSULATION
DUCT REF UP.
3. Remove the two COVER
SCREW which is on the center
of freezer by driver(-).
4. Remove the four SCREW of
COVER EVA FRE.
5. Hold the bottom of COVER EVA
FRE and pull it to disassemble.
6. Hold the bottom of MULTI
COVER and pull it. And than
hold the upper and disassemble
it completely.
29
Figure