Other Equipment; Installing The Software; Installing The Hardware - National Instruments NI USB-5132 Getting Started Manual

Other Equipment

There are required items not included in your device kit that you need to install or operate the
NI 5132/5133.
• 1/8 in. flat-head screwdriver (for mounting your device to a standard DIN rail)
• A desktop or laptop computer and its documentation

Installing the Software

You must be an Administrator to install NI software on your computer.
1. Install an ADE, such as LabVIEW or LabWindows
2. Insert the driver software media into your computer. The installer should open
automatically.
If the installation window does not appear, navigate to the drive, double-click it, and
double-click
autorun.exe
3. Follow the instructions in the installation prompts.
Note
installation. Accept the prompts to complete the installation.
Note
Instruments»NI-SCOPE for installation.
4. When the installer completes, select Restart in the dialog box that prompts you to restart,
shut down, or restart later.
5. If you are using a system running the LabVIEW Real-Time Module, download
NI-SCOPE to the target using Measurement & Automation Explorer (MAX). For more
information, refer to the Max Remote Systems Help by selecting Help»Help Topics»
Remote Systems in MAX.

Installing the Hardware

To install the NI 5132/5133, connect the USB cable to the PC and the oscilloscope.
4 | ni.com | NI USB-5132/5133 Getting Started Guide
.
Windows users may see access and security messages during
If installing from the NI Device Drivers DVD, select Modular
™ ™
/CVI .