Operation; Configuring The Procheck - METER PROCHECK Manual

2. OPERATION

Please read all instructions before operating the PROCHECK to ensure it performs to its full
potential.
PRECAUTIONS
METER sensors are built to the highest standards, but misuse, improper protection, or
improper installation may damage the sensor and possibly void the manufacturer's warranty.
Before using the PROCHECK, follow the recommended installation instructions and arrange
proper protections to safeguard sensors from damage.

2.1 CONFIGURING THE PROCHECK

Before taking measurements, configure the PROCHECK system date and time to ensure
accurate timestamps. ECH2O Utility automatically synchronizes the date and time of your
PROCHECK to the computer time when connected to a PROCHECK. The date and time can be
manually selected in the Set Date/Time from the Action menu (Section 4).
Use the following steps to configure the PROCHECK controller prior to readings.
1. Turn on the PROCHECK.
Press MENU to navigate to the Configuration tab (Figure 1).
2.
3. Scroll down to Date.
4. Press ENTER.
The system date appears in the center of the screen in a month day, year format
(Figure 2). Arrows appear above and below the first value.
OPERATION
Figure 1 Configuration tab
2