Electrical Connection; Test The Installation - Bosch NET 74 Series Installation Instructions Manual

Electrical connection
Test the installation
UE'h;_' in the Display
Place cooktop into cutout. Insert clamping screw into the bracket and secure
cooktop to countertop.
Use a wood block to protect fragile countertop materials.
/k CAUTION:Before installing, turn power OFF at the service panel. Lock sevice
panel to prevent power from being turned ON accidentally.
The branch-circuit breakers ampacity, the wire sizes and the connections must be
conform to the requirements of the National Electrical Code or Canadian Elektrical
Code and all local codes and ordinances.
Frame grounded by connection of grounding lead to neutral lead. If used in a mobile
home or if local codes do not permit grounding tfhrough neutral, open connection
and use grounding lead to ground unit in accordance with local codes. Connect
neutral lead to branch-circuit neutral conductor in usual manner.
Attach flexible conduit to the junction box.
/k CAUTION: To reduce the risk of electic shock and fire, do not use a flexible
power supply cord.
Connect the cooktop lead wires to the junction box supply wires in proper phase:
black (L1) to black
red (L2) to red
white wire to neutral
green wire to ground
Remove everything from the cooktop sudace.
Clean cooktop surface with cooktop cleaning creme.
Turn on power supply.
Verify that elements function properly.
The cooktop is connected incorrectly. Disconnect the appliance from the power
source at the circuit breaker or fuse.
6