Use a Conditional Access
Module
A Conditional Access Module (CAM) is
provided by digital TV service operators to
decode digital TV channels.
Note
•
If required, refer to documentation from your
operator on how to insert a smart card into the
Conditional Access Module.
Insert and activate a CAM
Caution
•
Be sure to follow the instructions described
below. Wrong insertion of a CAM may damage
both the CAM and your TV.
1
Switch off the TV.
2
Following the directions printed on the
CAM, gently insert the CAM into the
COMMON INTERFACE at the side of
the TV.
3
Push the CAM in as far as it will go.
4
Turn on the TV and wait for the CAM
to be activated. This may take several
minutes. Do not remove the CAM from
the slot when in use — removing the
CAM will deactivate digital services.
EN
44
Access CAM services
1
After inserting and activating the CAM,
press .
2
Press ▲ ▼◄► to select [Common
interface].
Applications provided by the digital TV
»
service operator appear on the screen.
Note
•
This menu option is available only if the CAM is
inserted and activated correctly.
Use Philips EasyLink
Your TV supports Philips EasyLink, which
enables one-touch play and one-touch
standby between EasyLink-compliant devices.
Note
•
Compliant devices must be connected to your
TV via HDMI.
Enable or disable EasyLink
Note
•
Do not enable Philips EasyLink if you do not
intend to use it.
1
Press .
2
Press ▲ ▼◄► to select [Setup] > [TV
settings] > [EasyLink].
3
Select [On] or [Off].