•
Press
to return to the previously-
viewed channel.
•
Enter a channel number using the
Numeric buttons.
To view analogue or digital channels
only
Filter the channel list to access analogue or
digital channels only.
1
In the channel list, press
2
Select [Select list] > [Analogue] or
[Digital], then press OK. Depending on
your selection, only digital or analogue
channels become available.
Adjust TV volume
To increase or decrease volume
•
Press
+/- on the remote control.
•
Press
+/- on the side of the TV.
To mute or unmute sound
•
Press
to mute the sound.
•
Press
again to restore the sound.
Use the [Sound] menu to adjust headphone
volume. For more information, see Set up the
TV > Change picture and sound settings >
More sound settings (Page 22).
.
Watch connected devices
Add new device
Note
•
Before watching a connected device, you must
add it to the home menu.
•
HDMI ARC compliant devices connected to
the HDMI ARC connector on the TV are
automatically added to the home menu.
1
Connect and switch on the device.
2
Press .
3
Select [Add your devices], then press
OK. Follow the on-screen instructions.
Watch connected device
1
Press .
2
Select the device from the home menu.
3
Press OK to confirm your choice.
EN
13