Use Your Product; Switch Your Tv On / Off Or To Standby; Switch Channels - Philips 42HFL4372D/10 User Manual

4 Use your
product
This section helps you perform basic TV
operations.
Switch your TV on / off or to
standby
To switch on
• If the standby indicator is off, press
(POWER) at the side of the TV.
• If the standby indicator is red, press
(Standby-On) on the remote control.
Tip
•
The front LED indicator does not turn on when
the TV is switched on.
•
The TV requires some time to start up. During
this time, the TV will not respond to the remote
control or side controls. This is normal behavior.
EN
12
To switch to standby
• Press (Standby-On) on the remote
control.
The standby indicator switches to red.
»
To switch off
• Press (POWER) at the side of the TV.
The standby indicator switches off.
»
Note
•
Though your TV consumes very little power
when in standby, energy continues to be
consumed. When not in use for an extended
period of time, disconnect the TV power cable
from the power outlet.

Switch channels

Press P +/- on the remote control or
•
P /CH +/- on the side of the TV.
, then select [Channel list] to use
• Press
the channel list.