Maintenance; Transportation And Storage; Resolving Problems; Operation Of The Charging System - Ecotap Homebox Manual

20. MAINTENANCE

Always switch off the power and read the user manual before
carrying out maintenance or fixing problems.
Only products approved by the supplier must be used for
repairs or replacement of components.
Repairs and replacements must be carried out by an
authorised employee / installer. All maintenance work must
be carried out in compliance with the NEN3140 and NEN 50110
Euro standards for low-voltage equipment.
Treat any damaged surface areas of the Homebox with anti-corrosive paint.

21. TRANSPORTATION AND STORAGE

Transport the Homebox in the box it was delivered in. When shipping the
Homebox, apply a clear indication that the item must be handled with care.

22. RESOLVING PROBLEMS

If the charging system does not work properly, you can contact back office
provider or an authorised installer in possession of measurement and testing
equipment with car simulation.

23. OPERATION OF THE CHARGING SYSTEM

The Homebox can be operated either with a charging pass or with the
button, or the system is self-starting.
The Homebox version "Laden Met Registratie / LMR" (Charging with
registration) needs to be registered.
This registration is possible by calling Ecotap® B.V. during office hours.
Tel. +31 (0) 411 74 50 20.
As soon as registration is completed, the Homebox can be used with any
Electric Transport charging pass, or other suitable pass.
When the Homebox is not in use, a green light will flash regularly.
Operation:
The charging procedure can be started and stopped by holding the charging
pass in front of the scan point, or by pressing the Start button (only for the
version with a Start button). You will hear 1 audio signal and the light starts
blinking green.
With the version with a type 2 socket, the plug is locked in the type 2
charging socket. The charging system then communicates with the vehicle
and with the back office system. Once all safety and payment conditions
have been checked the maximum allowed charging current is released.
18