Introduction; General; Warranty - Ecotap Homebox Manual

14. INTRODUCTION

Thank you for selecting the Ecotap® Homebox.
This manual describes the Homebox with socket and fixed charging cable
type 1 or 2 for versions with and without registration.
This manual contains important information on correct and safe installation
and use of the charging system.
The Homebox was designed for vehicles fitted with a mode 3 charging
system in conformity with IEC 61851-1 (edition 2.0) with a plug system that
conforms to VDE-AR-E 2623-2-2.
The charging system as a whole complies with directive 2014/35/EU on
harmonisation of the laws relating to electrical materials within certain
voltage limits (recasting of all earlier published versions).
This manual provides information on safe installation and use of the
Homebox. This manual was drawn up to ensure optimum operation and
lifespan of the Homebox.
This manual was drawn up with great care. However, if anything in the
manual is unclear, please contact your supplier before installing the
Homebox.
Proper operation of the Homebox can only be guaranteed if the Homebox is
installed by an authorised installer / engineer. If the Homebox is not installed
by an authorised installer, this may affect the product warranty.
Please read this manual carefully before installing and using this
charging system. Store this manual in the vicinity of the charging system
for easy access to the instructions and safety regulations.
© Copyright
No part of this publication may be copied, replicated or stored in a retrieval
system without the permission of Ecotap® B.V.
The original version of this manual was written in the Dutch language.

15. GENERAL

15.1 Warranty

The General Terms of Delivery of Ecotap® B.V. apply.
Ecotap® B.V. cannot be held liable for any injury or damage if the charging
system has been changed, damaged, converted or extended with other
components or if the instructions and conditions have not been observed.
14