Advertisement
Available languages
Available languages
Tools Required / Outiles Utiles /
Herramientas Útiles
17 mm
25 mm
English
Technical Information
Recommended water pressure
Max. water pressure
Recommended hot water temp.
Max. hot water temp
Flow rate - handshower
*Please know and follow all applicable local plumbing
codes when setting the temperature on the water heater.
Installation Considerations
•
For best results, Hansgrohe recommends that
this unit be installed by a licensed, professional
plumber.
•
Please read over these instructions thoroughly be-
fore beginning installation. Make sure that you
have all tools and supplies needed to complete
the installation.
•
This trim kit requires rough valve 13444181 and
mounting plate 39449001 (not included).
•
The rough valve and mounting plate must be
installed, and the mounting surface complete and
made watertight before installation of this trim kit.
•
This unit is not anti-scald. If required by local
plumbing code, install this unit in combination
with an approved remote pressure balance valve
or other approved device.
•
Protection against backflow is provided by a dou-
ble check valve and by a self-resetting diverter.
•
Keep this booklet and the receipt (or other proof
of date and place of purchase) for this product in
a safe place. The receipt is required should it be
necessary to request warranty parts.
15 - 75 psi
145 psi
10° - 140° F*
176°F*
max. .5 gpm
Advertisement
