Related Manuals for Grundfos ATEX Series
Summary of Contents for Grundfos ATEX Series
- Page 1 GRUNDFOS INSTRUCTIONS ATEX-Servomotors with Ex protection Installation and operating instructions...
-
Page 2: Table Of Contents
3.6 Safety instructions for installation, maintenance, and assembling of pump and servomotor inspection work 3.7 Unauthorised modification and manufacture of spare Grundfos declares that there is no additional ignition hazard as a parts result of assembling the pump and servomotor. Pump assembled 3.8 Improper operation... -
Page 3: Safety
3. Safety 3.6 Safety instructions for installation, maintenance, and inspection work This manual contains general instructions that must be observed during installation, operation and maintenance of the servomotor. The operations manager must ensure that all installation, This manual must therefore be read by the installation engineer maintenance and inspection work is carried out by authorised and and the relevant qualified personnel/operators prior to installation qualified personnel, who have been adequately trained by... -
Page 4: Technical Data
4. Technical data 4.1 Versions, servomotor product numbers and corresponding pump types A servomotor kit includes servomotor, console and mounting material. A spare servomotor is delivered without console and mounting material. Pump type key, Servomotor For pump type Servomotor kit Spare servomotor Control variant Supply voltage... -
Page 5: Transport And Storage
5. Transport and storage 6.2 Mounting When the pump and servomotor are ordered Do not throw or drop the servomotor. Note together, the servomotor will be supplied fitted to the Caution Do not use the protective packaging as transport pump ready for connection. packaging. - Page 6 Installation sketch for the electrical servomotor Observe the installation and operating instructions Note for the dosing pump. Fig. 2 Installing the servomotor 4. Insert the scale ring (7) and coupling section (3b) (carrier) through the side of the lantern. Push one coupling section (3b) onto the other coupling section (3a) so it is in the correct position (see fig.
-
Page 7: Earthing
6.3 Earthing Use separate, shielded lines for low voltages (e.g. Note potentiometers, analogue signals). Caution The servomotor must be earthed. Use screwed cable joints appropriate for the 6.4 Electrical connections connection line. Note The stated degree of protection can only be ensured Warning if suitable screwed cable joints are used. -
Page 8: Commissioning
7. Commissioning 8. Operation Before start-up, all components of the system must Do not use the position adjustment knob at the Caution be ready for start-up. servomotor. When using the position adjustment knob, the min./max. position can be exceeded. Caution Observe the installation and operating instructions Exceeding the min./max. -
Page 9: Maintenance
Dust must not be allowed to accumulate > 2 mm. 10. Disposal This product or parts of it must be disposed of in an environmentally sound way. Use appropriate waste collection services. If this is not possible, contact the nearest Grundfos company or service workshop. Subject to alterations. - Page 11 Siu Wai Industrial Centre Turkey Poland GRUNDFOS Canada Inc. 29-33 Wing Hong Street & GRUNDFOS POMPA San. ve Tic. Ltd. Sti. 2941 Brighton Road GRUNDFOS Pompy Sp. z o.o. 68 King Lam Street, Cheung Sha Wan Gebze Organize Sanayi Bölgesi Oakville, Ontario ul.
- Page 12 96681511 0517 ECM: 1206927 www.grundfos.com...
Need help?
Do you have a question about the ATEX Series and is the answer not in the manual?
Questions and answers