Turn On; Set Clock; Listen To Radio; Tune To A Radio Station - Philips CEM200/51 User Manual

For first-time use:
1
Remove the protective tab to activate the
remote control battery.
2
Open the battery compartment.
3
Insert 1 CR2025 batteries with correct
polarity (+/-) as indicated.
4
Close the battery compartment.

Turn on

1
Press to turn on the unit.
• To turn off the unit, press
seconds.

Set clock

1
Press MENU/DISP for 3 seconds.
2
Press or repeatedly until the
currently time is displayed.
3
Turn clockwise to set hour.
4
Press to confirm.
5
Turn anti-clockwise to set minute.
6
Press to confirm.
View clock
1
Press MENU/DISP repeatedly until the
clock is displayed.
14 EN

4 Listen to radio

Tune to a radio station

1
2
3
Select tuner sensitivity
You can adjust the tuner sensitivity if you want
to receive more radio stations or only stations
with strong signal.
1
2
3
for 3
Select stereo/mono broadcasting
For stations with weak signals: to improve the
reception, change to monoaural sound.
1
2
3
Press SOURCE repeatedly to select
Tuner.
Press or to select band: [FM1],
[FM2], [FM3], [AM1], or [AM2] .
Press or to tune to a radio station
manually.
»
The radio station is broadcast.
• To search for a radio station
automatically, press
seconds.
Press MENU/DISP for over 2 seconds.
Press or repeatedly until [LOCAL]
or [DX] is displayed.
Rotate to select a setting:
• [ LOCAL] (local): Only stations with
strong signal can be broadcast.
• [ DX] (distance): Stations with strong
and weak signals can be broadcast.
Press MENU/DISP for 3 seconds.
Press or repeatedly until [STEREO]
or [MONO] is displayed.
Turn to select a setting:
• [STEREO]: stereo broadcast.
• [MONO]: mono broadcast.
or for 3