Other Sound Settings; Adjust System Settings; Select Blackout Setting; Turn Demo Mode On/Off - Philips CEM200/51 User Manual

Other sound settings

You can also edit user preset EQ.
1
Press EQ/Audio for 3 seconds.
2
Press or repeatedly to select the
item to be adjusted:
• [BAS] (bass) range: -7 to +7.
• [TRE] (treble) range: -7 to +7.
• [BAL] (balance) range: 12L to 12R. (L
= left speaker, R = right speaker)
• [FAD] (fader) range: 12R to 12F. (R =
rear speaker, F = front speaker)
3
Turn to select a value.
7 Adjust system
settings

Select blackout setting

You can set the screen to turn off automatically
after the unit is idle for 10 or 20 seconds.
1
Press MENU/DISP for 3 seconds.
2
Turn to select a setting:
• [BKO 10 S] : Turn off the screen
automatically 10 seconds after last
operation.
• [BKO 20 S] : Turn off the screen
automatically 20 seconds after last
operation.
• [BKO OFF] : Never turn off the
screen.

Turn demo mode on/off

When demo mode is on, when the unit is
idle for more than 2 minutes, all functions are
displayed.
1
Press MENU/DISP for 3 seconds.
2
Press or repeatedly to until [DEMO]
is displayed.
»
The screen shows current Demo
mode setting.
3
Turn to select a setting:
• [DEMO ON] : Turn on the demo
mode.
• [DEMO OFF] : Turn off the demo
mode.

Select start volume

Each time you turn on the unit, it can play at the
last listened volume or at the preset volume.
1
Press MENU/DISP for 3 seconds.
EN 19