Turn beep sound on/off
Each time you press a button, the unit beeps.
You can turn off/on this beep sound.
1
Press MENU/DISP for3 seconds.
2
Press
or
repeatedly to until [BEEP
ON] or [BEEP OFF] is displayed.
3
Rotate
to select a setting:
•
[BEEP ON]: Turn on the beep
sound.
•
[BEEP OFF]: Turn off the beep
sound.
4
Press
to confi rm.
Turn display scroll on/off
For track information that is longer than the
display panel: you can select to cut off the
remainder of the text, or scroll to display the
full text.
Note
•
If any special characters are present in the
MP3 track name or album name, it may not
display correctly on the screen because these
characters are not supported.
•
Some WMA is protected by Digital Rights
Management (DRM), it cannot be played on
the unit.
•
Folders/fi les exceed the supported limit of the
unit are not displayed or played.
1
Press MENU/DISP for 3 seconds.
2
Press
or
repeatedly to until [ROLL
ON] or [ROLL OFF] is displayed.
3
Turn
to select a setting:
•
[ROLL ON] (scroll on): Auto scroll
during play.
•
[ROLL OFF] (scroll off): No auto
scroll display.
4
Press
to confi rm.
Select shock-protect setting
You can select the shock protection setting,
depending on the stability of your car and the
condition of the road.
1
Press MENU/DISP for 3 seconds.
2
Press
or
repeatedly until [ESP] is
displayed.
3
Turn
to select a setting:
•
[ESP 12]: select this when the road is
smooth and there are few bumps.
•
[ESP 45] select this when the road is
bumpy and unstable.
4
Press
to confi rm the selection.
Reset
You can reset the unit to its default setting.
1
Detach the front panel (see 'Detach the
front panel' on page 25 ).
2
Press the reset button by using a ball-
point pen or a similar tool.
»
Preset adjustments such as preset
channels and sound adjustments are
erased.
EN
23