Adjust System Settings; Select Blackout Setting; Turn Demo Mode On/Off; Select Start Volume - Philips CEM210/98 User Manual

7 Adjust system
settings

Select blackout setting

You can set the screen to turn off automatically
after the unit is idle for 10 or 20 seconds.
1
Press MENU/DISP for 3 seconds.
2
Turn to select a setting:
[BKO 10 S] : Turn off the screen
automatically 10 seconds after last
operation.
[BKO 20 S] : Turn off the screen
automatically 20 seconds after last
operation.
[BKO OFF] : Never turn off the
screen.

Turn demo mode on/off

When demo mode is on, when the unit is
idle for more than 2 minutes, all functions are
displayed.
1
Press MENU/DISP for 3 seconds.
2
Press or repeatedly to until [DEMO]
is displayed.
»
The screen shows current Demo
mode setting.
3
Turn to select a setting:
[DEMO ON] : Turn on the demo
mode.
[DEMO OFF] : Turn off the demo
mode.

Select start volume

Each time you turn on the unit, it can play at the
last listened volume or at the preset volume.
1
Press MENU/DISP for 3 seconds.
2
Press or repeatedly to until [V -
LAST] or [V - ADJ] is displayed.
3
Turn to select a setting:
[V - LAST] : Each time you turn on
the unit, the volume remains from its
previous use.
[V - ADJ] : Each time you turn on
the unit, the volume is at the preset
level.
Store preset volume
You can turn on the unit at a preset volume.
1
Select [V - ADJ] as the start volume.
2
Press MENU/DISP for 3 seconds.
3
Press or repeatedly to until [A-VOL]
is displayed.
4
Turn to select a value: 0 - 47.

Turn beep sound on/off

Each time you press a button, the unit beeps.
You can turn off/on this beep sound.
1
Press MENU/DISP for3 seconds.
2
Press or repeatedly to until [BEEP
ON] or [BEEP OFF] is displayed.
3
Rotate to select a setting:
[BEEP ON]: Turn on the beep
sound.
[BEEP OFF]: Turn off the beep
sound.

Turn display scroll on/off

For track information that is longer than the
display panel: you can select to cut off the
remainder of the text, or scroll to display the
full text.
EN 23