Cleaning Instructions - Gemini GTF45 Manual

CLEANING INSTRUCTIONS

1. Always disconnect the cord from the electrical outlet before cleaning your fan.
2. Dust may be removed by using a vacuum cleaner along the back of the fan where
the plastic grille covers the air intake.
3. Wipe the exterior surfaces of the fan occasionally with a damp cloth (not dripping
wet) and dry thoroughly with a soft dry cloth before operating the fan.
4. Do not use harsh cleaners or materials to clean this unit, doing so will cause damage.
5: Unscrew the screw in front of fan grille, open the grille to clean the fan wheel softly.
Please see below picture
CAUTION: DO NOT ALLOW WATER TO RUN INTO THE INTERIOR OF THE FAN AS
THIS COULD CREATE A FIRE OR ELECTRIC SHOCK HAZARD. THE FAN MOTOR
IS FACTORY LUBRICATED FOR LIFE AND WILL REQUIRE NO FURTHER LUBRI-
CATION. NO OTHER USER MAINTENANCE IS REQUIRED OR RECOMMENDED.
IF SERVICE IS REQUIRED, SEND YOUR FAN TO THE NEAREST AUTHORIZED
SERVICE DEPOT.
TO STORE:
1. Follow cleaning instructions 1-4 above.
2. Retain the original packaging to store your fan.
3. Always store in a dry place.
4. Never store while still plugged in.
5. Never wrap cord tightly around the fan or put any stress on the cord where it
enters the fan as it could cause the cord to fray or break.
Care and Maintenance
1: Always disconnect the cord from the electrical outlet when cleaning your fan.
2: Light accumulated dust may be removed from the fan with a soft cloth or vacuum
cleaner using the dusting brush attachment.
6