Parts Of The Fan; Assembly Instructions - Gemini GTF45 Manual

Parts of the fan

1. Top control panel
2. FND Display
3. Front cover
4. Back cover
5. Grille
6. Column
7. Base
8. Remote control
CAUTION: THIS FAN MUST OPERATE IN THE UPRIGHT POSITION ONLY. DO NOT
LAY FAN ON ITS SIDE OR IN ANY OTHER POSITION. DOING SO MAY CAUSE
DAMAGE TO THE FAN AND/OR PERSONAL PROPERTY. DO NOT USE THIS FAN
WITHOUT ITS BASE.

Assembly Instructions

1. Remove all items of packing from the tower fan.
2. Pass the power cord through the middle of
the two base pieces
3. Position base piece onto the
support posts of the other base
piece to create the base assembly.
4. Turn the tower body upside down
position the base assembly onto the
pedestal tube. Ensure that the
pedestal tube is sitting flush in
the base assembly.
5. Screw the base assembly onto the pedestal tube with the supplied screws.
6. Position the power cord into the provided cord track in the rear base.
7. Turn the tower fan back to upright position. It is now ready for use.
3