FND DISPLAY
1. Ion
2. Sleep wind
3. Natural wind
4. Display room temperature or timer
5. Oscillation
6. Speed
Guidelines for using the remote control
• The remote control must be pointed towards the receiver on the fan in order to work.
• The remote control may not operate in a room where heavy machine is operating.
• Do not block the line of sight between the remote control and the receiver.
• Handle the remote control with care. Do not drop the remote control on the floor or
bang it against hard objects.
Guidelines for use of batteries
• If the remote control will not be used for a long period of time, remove the batteries
from the battery compartment.
• The remote control uses two AAA batteries, both of which should be new and
replaced at the same time when they run out. (Battery not included)
• Clean battery contacts and also those of the device prior to battery installation
• Ensure the batteries are installed correctly with regard to polarity, matching +/- sides
of the battery to corresponding indications on the remote control.
• Remove used and dead/discharged batteries promptly.
SPECIFICATIONS
Model Number:
GTF45
Voltage:
230Vac / 50Hz
Wattage:
35 Watt
Oscillation:
90 degrees
Weight:
4.20 kg
Dimensions:
L320xW320xH1145mm
1
2
5
5
3
4
6