Advertisement
Put the position of the fan rear grille on the motor head（STEP1）, and tighten the knob
clockwise to fix the rear grille cover to motor head(STEP2).
4.Install the Fan Blade
Put fan blade to the motor shaft, and tighten the knob in clockwise direction(STEP1).
Then use the screw to fix the front grille.
Note:Please make sure the fan blade is tightened, otherwise there will be danger!
Cleaning and Maintenance
Warning
－
Before clearing, please turn off the power switch and pull out the plug, do not spray
water or spray mist directly on the fan.
Cleanable Parts
－
Use the screwdriver to remove the screws between the front grille and the rear grille. Use
the soft cloth or sponge and neutral detergent to wipe the exterior. And let the parts
drying completely after cleaning.
10
Advertisement
