Cleaning And Maintenance; Operating Instructions - Gemini GTF35 Manual

Table of Contents

Unpacked all the packaging material from the box.

Insert the plug into a 220V~ 50Hz electrical power supply outlet.

Press the function keys on the Touch-control panel :

POWER: Turn the fan on by pressing the Power key, to turn off the fan just press

the power key again.

SPEED: Adjust the fan speed to a desired level: HI, MID, LOW. The fan speed is

default as LOW level.

MODE: Press this key to set the fan mode: Normal, Natural and Sleep. And LED

display light can be dim by pressing MODE key for 3 seconds.

TIMER: Press Timer key, to set between from 0.5 hour to 8 hours timer setting (0.5

hr per setting). The Blue LED display will show the time being pressed. The fan will

automatically shut off when the timer is over.

SWING: Press SWING key to turn on the oscillation function. Press once to turn off

the function.

Blue LED display shows the current room temperature.

All functions performed with the remote controller works identically to the control panel.

CLEANING AND MAINTENANCE:

WARNING: ALWAYS UNPLUG THE UNIT BEFORE MOVING OR SERVICING. DO NOT

IMMERSE THE POWER CORD, PLUG AND THE WHOLE APPLIANCE INTO WATER

OR RINSE UNDER THE TAP!

Caution: Do not use detergent, gasoline, benzene, thinner, or other solvents to clean

the unit to avoid damage of the appliance.

Unplug the unit and wait until the fan stop running before cleaning.

Use a damp cloth to clean the surface of the fan.

Take off the Cover carefully and take out the Mesh Filter. You could wash the filter under

running water. Rinse and dry the filter before place back.

It is recommended to clean the fan every month.

It is not recommended to disassemble the fan, except by the authorized agent or any

agent qualified to undertake electrical repairs.

If the fan will not be used for a long time, store it in the cool, dry, safety place and far

away from children. Do not store the appliance in hot place and under sunshine.

Table of Contents