Braun Professional ES 1 Manual page 7

• Use a higher temperature setting for thicker hair and a
lower temperature for fine hair. The higher the tempe-
rature setting, the faster you will get a sleek straightening
result.
Straightening
• Make sure your hair is completely dry before using the
appliance.
• First, comb your hair through with a wide toothed comb to
remove tangles (A).
• Section your hair off. Starting close to the roots, place a
section of hair (strands of 3-4 cm max.) between the
straightening plates and close them (B).
• Gently glide your straightener from the roots to the ends
of the hair. Glide along the strand with a continuous
movement throughout the straightening process. This will
ensure best straightening results without damaging the
hair. Do not rest on one spot for longer than 2 seconds.
The floating straightening plates ensure easy and smooth
gliding (C).
• For improved control when gliding along a strand, you
may stabilise the appliance using two fingers of your other
hand to hold the cool touch points (1).
• Be careful, all other housing parts around the straighten-
ing plates will get hot. Therefore, do not let hot housing
parts get in contact with the skin.
• To improve the straightening result, select a higher
temperature setting. Choose a lower temperature, if you
prefer a more gentle straightening.
After use
After each use, switch off the appliance, unplug it and let it
cool down fully.
Never immerse the appliance in water.
Clean the appliance with a damp cloth and use a soft cloth
to dry.
Do not use any cleaning agents such as spirit or benzine.
For storing the appliance, you may hang it using the hanging
loop. However, make sure that it is switched off.
Subject to change without notice.
This product conforms to the European Directives
EMC 2004/108/EC and Low Voltage 2006/95/EC.
Please do not dispose of the product in the household
waste at the end of its useful life. Disposal can take
place at Braun Service Centre or at appropriate
collection points provided in your country.
7