Quick Programming Reference
CHECK
1.
PATCH
2.
EDIT
PATCH
CLEAR
3.
PATCH
4.
SET CS
PATCH
GET CS
5.
PATCH
SAVE
6.
PATCH
LOAD
7.
PATCH
EEPROM
8.
IPRO-X
9.
EEPROM
FW-LOAD
10. EDIT KEY
SECURITY
11. SET KEY
SECURITY
12. GET KEY
SECURITY
13. MONITOR
SLIDER
14. CHECK CS
FIRMWARE
15. FIRMWARE
VER X.X
16. SERIAL #
XXXXXX
17. BATTERY
X.X OKAY
18. PRINTOUT
PATCH
19. LCD VIEW
ADJUST
6
Check the DMX channel patch for each of the sliders.
Checks the patch saved in the CS-IPRO memory only.
Edit the patch and assign DMX channel(s) to each of the sliders.
Edits the patch saved in the CS-IPRO memory only.
Clear the DMX channel patch for a selected slider or all sliders.
Clears the patch saved in the CS-IPRO memory only.
Set the DMX channel patch for a CS-DMX control station.
Transfers the patch from CS-IPRO memory to control station memory.
Get the existing DMX channel patch from a CS-DMX control station.
Transfers the patch from control station memory to CS-IPRO memory.
Save the DMX channel patch into the removable EEPROM Memory Module.
Saves the patch in the CS-IPRO memory only.
Load the DMX channel patch from the removable EEPROM Memory Module.
Loads and saves the patch into the CS-IPRO memory.
View the type of EEPROM memory module plugged into the CS-IPRO.
Load new firmware into the CS-IPRO via the EEPROM memory module.
Edit the security key for the CS-IPRO.
Set the security key for a CS-DMX control station.
Get the existing security key from a CS-DMX control station.
Monitor the slider level on a CS-DMX control station.
Check the firmware version running on the CS-DMX control station.
View the firmware version running on the CS-IPRO microcontroller.
View the CS-IPRO unique six-character silicone serial number.
View the CS-IPRO battery voltage level and status.
Printout the DMX channel patch for a selected slider or all sliders.
Prints out the patch saved in the CS-IPRO memory only.
Adjust the contrast of the LCD Display for optimum viewing.
NOTE: Refer to page 11 for typical application procedures.
www.johnsonsystems.com
to System Configuration Menu Items