Table of Contents
Advertisement
Introduction
CS-IPRO is a wireless hand-held programmer used to communicate
with and configure CS-DMX series control stations.
The CS-IPRO features a removable EEPROM Memory Module used
to save/backup the DMX channel patch configuration. The EEPROM
Memory Module can be easily removed and stored in a safe place.
Additional EEPROM Memory Modules are available if multiple
backups are required. An EEPROM Memory Module may also be
provided for firmware updates.
Wireless communication between the CS-IPRO and CS-DMX control
stations is via bidirectional infrared LED's. The CS-IPRO infrared LED
is located behind the window at the top of the enclosure. The CS-DMX
control station infrared LED window is located on the front, between
the master slider and slider 1. The maximum range for sending and
receiving data between the CS-IPRO and CS-DMX control stations is
12" (30 cm).
The CS-IPRO is capable of printing out various configuration settings
CS-IPRO
when used in conjunction with a hand-held infrared printer (Johnson
System Inc., Part Number: JS-IP). The maximum range for sending
data from the CS-IPRO to the hand-held infrared printer is 6' (1.8 m).
Specifications
WARNING: For indoor use only!
•
Enclosure Dimensions: Width 2.75" (70 mm) x Height 4.95" (125 mm) x
Depth 0.95" (24 mm)
•
Total Weight: 0.33 lb. (150 g)
•
Power Requirement: 2 x AA Batteries - Alkaline or Nickel Metal Hydride
(NiMh) ONLY!
•
Transmit Range from CS-IPRO to CS-DMX: 12" (30cm)
•
Receive Range from CS-DMX to CS-IPRO: 12" (30cm)
•
Transmit Range from CS-IPRO to JS-IP: 6' (1.8m)
•
Operating Temperature Range: 50°F (10°C) to 104°F (40°C)
www.johnsonsystems.com
3
Advertisement
Table of Contents
