Grip And Built-In Battery; Charging; Using The Grip - dji RONIN-S User Manual

Hide thumbs Also See for RONIN-S:

Table of Contents

Grip and Built-in Battery

The Grip is for handheld use. The built-in battery within the Grip has a capacity of 2400 mAh

and able to power the Ronin-S for up to 12 hours (when the Ronin-S is properly balanced

and used under normal conditions).

Charge the grip using the 24W USB Power Adapter and USB-C cable provided by

connecting to the USB-C port on the gimbal.

Charging Time: approx. 2 hours 15 minutes

Power Outlet

100 - 240 V

With the grip attached, you can use a power bank to power the Ronin-S

continuously through the USB-C port.

Press the grip power button once to turn on the grip, and then press and hold the gimbal

power button to turn on the gimbal.

Press and hold the gimbal power button to turn

off the gimbal. Press once then again and hold to

turn off the grip. (The grip automatically powers

off if it is not connected to the gimbal or the

gimbal is not powered on for 12 hours.)

When turning on the Ronin-S, ensure to keep it level and steady.

USB Power Adapter

USB-C Port

High

Low

Table of Contents

Do you have a question about the RONIN-S and is the answer not in the manual?