This product and document are copyrighted by DJI OSMO with all rights reserved. No part of this product or document shall be reproduced in any form without prior written consent of or authorization from DJI OSMO.
10. DC OUT Port (13 V-17 V/3 A) 5. M Button 11. Trigger 6. Camera Control Button 12. Lever 13. 8-pin Port Installation Attach the Tethered Control Handle to the Ronin-S’s grip and toggle the lever to the locked position.
Page 4
Universal Mount using the control cable provided. Power on the grip and begin to use the Tethered Control Handle to control the gimbal and camera. The Ronin-S Focus Wheel and Command Unit can be mounted on the Tethered Control Handle. Follow the steps below to mount.
Push the joystick up or down to control the movement of the tilt axis and push it left or right to control the movement of the pan axis. Go to the Control page in the DJI Ronin app to adjust the parameters for the pan, tilt, and roll axes. Camera Control Button Press halfway to auto focus, as you would the shutter button on most DSLR cameras.
Page 7
2. CAN Bus 接口 8. 盘齿 3. 配置指示灯 9. 3/8”-16 接口 4. 摇杆 10. DC OUT 接口(13-17 V/3 A) 5. 配置切换按键(M 按键) 11. 模式切换按键 6. 相机控制按键 12. 锁扣 13. 8-pin 接口 安装 将控制手柄安装至 Ronin-S 手柄,安装到位后锁紧锁扣。 通过标配信号控制线连接控制手柄 DC OUT 接口与多功能转接件接口,实现通信。 开启 Ronin-S 手柄电源即可使用。...
Page 8
Ronin-S 跟焦轮、控制模块等配件可安装至 8-pin 接口上使用,安装示意如下图所示。 控制手柄摇杆可拆卸,用户可根据个人习惯更换标配长摇杆使用。 控制手柄预留通用冷靴接口、 3/8” -16 接口和盘齿接口, 可固定至其它平台。 DC OUT 接口可连接图传、监视器、多功能转接件。CAN Bus 接口为预 留接口。 操作 M 按键 短按 M 按键则可切换配置参数。配置指示灯对应显示当前配置。 长按 M 按键进入运动模式。 六击 M 按键可恢复当前用户配置默认参数以及蓝牙密码。 模式切换按键 长按进入锁定模式;松开按键解除锁定模式。 双击模式切换按键使云台回中。长按 M 按键使云台进入运动模式再双击模式切换 按键(长按 M 按键不放),可使云台锁定在运动模式,再次双击可解锁。 三击将使云台进入自拍模式。 四击模式切换按键(第四击按住不放)启动摇杆校准。 当云台出现漂移(没有通过摇杆控制云台但云台自行运动)才需要进行摇杆校准。 启动摇杆校准后,指示灯绿灯闪烁,校准过程中持续最大幅度推动摇杆转圈。转...
Indirizzo di contatto UE: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany Déclaration de conformité UE : Par la présente, SZ DJI Osmo Technology Co., Ltd. déclare que cet appareil est conforme aux principales exigences et autres clauses pertinentes de la directive européenne 2014/30/EU.