E.p.a. Emission Controls - Mercury 540 Bravo Manual

E.P.A. Emission Controls

INTRODUCTION
Consistent with the obligations created by 40 CFR Part 1045, Subpart B,
Mercury Marine provides an emission warranty of three years or 480 hours of
engine use, whichever occurs first, to the retail purchaser for electrical
components of the emission control system, and one year or 150 hours of
engine use, whichever occurs first, to the retail purchaser for mechanical
components of the emission control system. The engine is designed, built, and
equipped to conform at the time of sale with applicable regulations under
section 213 of the Clean Air Act, and the engine is free from defects in
materials and workmanship that cause the engine to fail to conform with
applicable regulations.
EMISSION CONTROL SYSTEM COMPONENTS
The emission‑related warranty covers all components whose failure would
increase an engine's emission of any regulated component including the
following list of components:
1. Fuel metering system
a. Carburetor and internal parts (or fuel pressure regulator or fuel
injection system)
b. Air/fuel ratio feedback and control system
c. Cold start enrichment system
d. Intake valves
2. Air induction system
a. Controlled hot air intake system
b. Intake manifold
c. Air filter
d. Turbocharger systems
e. Heat riser valve and assembly
3. Ignition system
a. Spark plugs
b. Magneto or electronic ignition system
c. Spark control system
d. Ignition coil or control module
e. Ignition wires
4. Lubrication system
a. Oil pump and internal parts
b. Oil injectors
c. Oil meter
5. Positive crankcase ventilation (PCV) system
WARRANTY INFORMATION
10
eng