Step 6: Install Webpam - Promise Technology FASTTRAK SX4100 Quick Start Manual

Step 6: Install WebPAM

(Windows)
Web-based Promise Array Management (WebPAM) software allows you to
remotely control your FastTrak SX4100 using the internet. You can perform tasks
including creating and deleting arrays, synchronization The server with the
FastTrak SX4100 must be on a network connected to the internet.
1. Find WebPAM on the software CD, and run WebPAM Installer.exe.
2. Check "I accept the terms of the license agreement" then click OK to accept
the license. Do not install in the software if you do not accept the terms of the
license.
3. Set a location to install WebPAM. You can type or browse for a path if you do
not want to use the default location.
4. If you want to install Secure Sockets Layer support check External SSL
Security then click next. If you choose not to install Secure Sockets Layer
support now, you can change the setting later.
5. Check the information summary is correct then click Install to start
installation.
6. Click Finish when installation is complete.
7. You can register WebPAM online. Registering entitles you to support from
Promise Technology, Inc. Check Register Your Product On-line if you want to
register.
8. Click Finish to exit WebPAM installer.
9
Step 6: Install WebPAM