Step 2: Install The Fasttrak Card - Promise Technology FASTTRAK SX4100 Quick Start Manual

Step 2: Install the FastTrak Card

The FastTrak RAID Controller card fits into any available:
• 32-bit PCI slot (must be PCI 2.3 compliant)
• 32-bit portion of a 64-bit PCI slot
on the PC's motherboard as shown in the illustration.
1. Remove the cover of your system.
2. Remove the inside slot cover of an available 32-bit PCI slot on the
motherboard.
3. Install the FastTrak card into the open slot. Secure the bracket to the
system's frame.
4. Fasten the FastTrak card bracket to the system case.
The FastTrak SX4100 Controller Card is a PCI Plug-n-Play (PnP)
device. No changes are necessary in the motherboard CMOS/
BIOS Setup for resources or drive types in most applications.
Step 2: Install the FastTrak Card
Notes
3