Changing The Oven Light - Samsung NX58 Series User Manual

Maintaining your appliance
52 English
NX58R4311SS_AA_DG68-01151A-00_EN.indd 52
WARNING
Do not remove or lift the cooktop during
cleaning. Doing so could damage the
gas lines leading to the surface burner
manifolds, causing poor and/or dangerous
operation.
3. Clean the cooktop surface with warm,
soapy water and a soft, damp cloth.
If spill goes under a surface burner,
remove the surface burner cap and head
to access and clean the spill.
4. Rinse with clean water and dry and
polish with a soft, dry cloth.
5. Reassemble burner components (if
removed) and replace the burner grates.

Changing the oven light

The oven light is a standard 40-watt appliance bulb. It will automatically come on
when the oven door is opened. It can also be turned on and off when the oven
door is closed by pressing the Oven light pad on the oven control panel.
NOTE
The oven light will not work during a self-cleaning cycle.
WARNING
Disconnect electrical power to the range before replacing the oven light. This will
prevent any personal injury due to electric shock.
1. Make sure the oven and the light bulb
2. Open the oven door.
Oven light cover
and bulb If the oven racks are in the way, they can
be repositioned or removed before you
change the oven light.
3. Turn the glass light cover in the rear
4. Turn the bulb counterclockwise to
5. Replace the bulb with a new 40-watt
6. Replace the glass light cover by turning
7. Close the oven door and reconnect the
are cool.
NOTE
upper-right corner counterclockwise to
remove it.
remove it from its socket.
appliance bulb. Turn the bulb clockwise
until it is seated securely in the socket.
it clockwise until it is seated securely.
electrical power to the range.
1/25/2019 11:18:38 AM