Surface Cooking; Lighting A Gas Surface Burner; Manually Lighting A Gas Surface Burner; Flame Size Selection - Samsung NX58 Series User Manual

Surface cooking

WARNING
BEFORE USING THE SURFACE BURNERS, make sure to follow all the safety
warnings and precautions listed on page 7. Failure to do so could result in product
damage, personal injury, and/or death.

Lighting a gas surface burner

Make sure all surface burners are positioned and assembled properly.
NOTE
We highly recommend using the right front side burner for simmering tomato
sauce and right rear side burner for melting chocolate.
NX58R4311SS_AA_DG68-01151A-00_EN.indd 23
1. Push in and turn the control knob to the
LITE position. You will hear a "clicking"
sound indicating the electronic ignition
system is working properly.
2. After the surface burner lights, turn the
control knob to adjust the power setting
of the surface burner and turn off the
electronic ignition system.

Manually lighting a gas surface burner

If a power failure occurs, the surface burners can still be lit manually.
NOTE
Use extreme caution when manually lighting a surface burner.
1. Hold a long gas grill lighter to the surface burner you want to light.
2. Push in and turn the control knob for that burner to the LITE position.
3. After the burner has lit, set the control knob and the burner to the desired
setting.

Flame size selection

WARNING
Flames larger than the bottom of the cookware will not result in faster heating,
but could result in a fire hazard and/or personal injury.
The flames on the burners should always stay under the cookware. The flames
should never extend beyond the bottom surface and/or up the sides of the
cookware.
Always watch the flames when adjusting the heat setting with the control knob(s).
The flames should always match the size of the cookware being used.
English 23
1/25/2019 11:17:43 AM