Sapho LB402 Installation And User Manual page 19

1.Clean the outside parts of the product.
Use a smooth sponge/cloth with diluted kitchen
detergent to clean the product.Do not use the
following types: hydrogen chloride detergemt,
paining thinner, benzene, abrasive paper, polishing
agent, fragrance and insecticide, etc.
Paining thinner
Insecticide
Abrasive paper
3.
Clean the filter
and regulator
(If the water flow is smaller than usual)
1、
Clean the filter for both sides. Make sure to
disconnect the water supply hose during cleaning.
2、Clean the regulator o-ring (See the step 2 on the
page 5 to find how to remove and install the
regulator o-ring).
Braided hoses
Filter
Regulator
2.Clean the nozzle
Pull out the nozzle softly and use smooth
cloth/sponge or toothbrush with kitchen
detergent to clean the nozzle.
4. Remove the main body.
Close the lid. Push the dismantlement button and
pull out the product as the arrow the figure. Then
the product will be dismantled.
Dismantlement button