Chevrolet Corvair 95 Rampside Manual page 6

Three Speed Shift Pattern
TO STOP-Release the accelerator and depress the
broke pedal. As car slows down, depress the clutch
pedal and move the gearshift lever into Neutral.
NEUTRAL- For use when starting or idling engine.
REVERSE-Operate as for 1 sf Gear but always at a
slow speed.
TOWING-Atta ching points for lifting and towing are
located in the front and rear bumper brackets.
5
Four Speed Shift Pattern
PUSHING TO START
• Turn on key and depress clutch pedal.
• Place gearshift lever in Neutra l position until car
speed reaches 15 MPH .
• Move shift lever to 3rd position and slowly release
clutch pedal.
• Never attempt to start the cor by towing.