Advertisement
DIMMER SWITCH
The foot button switches the headlights between
"
high" and "low
"
beam
.
The red "high" beam indicator
will be lighted when the headlights are on
"
high" beam.
Always dim the lights when approaching oncoming cars.
TURN SIGNAL
The turn signal lever should be moved UP to signal
a
right
tu,n or
DOWN
to signal a left turn. The green
indi cator lights in the instrument panel will signal the
direction as will the front and rear turn signal lamps.
When the turn
is
completed
,
the lever
will
automatically
return to
ne
utral position.
Get into the habit of turning
on the signal a block or two
ahead of where you plan to
turn. Drivers who are following
will appreciate your consider-
ation.
LIGHTING SYSTEM TROUBLE CHECKS
e-
If
headlights flicker on and off rapidly, your Author-
ized Chevrolet Dealer should be called upon immedi-
ately to correct the
overloa
d condition.
•
If the tail light fuse blows out, the instrument panel
lights will also be inoperative. Check both the instru-
ment panel fuse and
th~
taillight fuse. (See page 39.)
•
If,
when signalling a turn, the indicator light comes on
but does not flash, a burned out parking or tait lamp on
that side or an improper flasher 13-bulb instead of
11
2-bulb flasher) is indicated.
•
If
the turn indicator comes on and stays on but does
not flash when signalling a turn in either direction,
and no
"
clicking" is heard, replace the flasher.
•
If
flasher clicks but the indicator light does not operate,
replace the indicator bulb .
•
A series type 2-bulb flasher is standard equipment on
Corvairs.
Always replace with the same type flasher.
Advertisement
