Download Print this page

Chevrolet Corvair 95 Rampside Manual page 4

Hide thumbs Also See for Corvair 95 Rampside:

Advertisement

STARTING THE ENGINE
......
--_.-
IGNITION SWITCH
START-Used
only·
when starting
engine.
W Hen released
,
switch returns to
ON.
ON-For normal operation after engine has been started
.
OFF-Turns off engine and
accessories.
LOCK-Same as
"OFF"
except
that
switch cannot be
moved into or out of this position without ignition
key.
Always switch to LOCK and remove the key
when leaving your car unattended.
,NOTE: Key cannot be removed from switch when in OFF
position,
thus guarding against accidentally leaving
switch OFF but not lacked
.
The key may be removed
when the switch is in LOCK or ON position and the
switch
may
be removed between
OFF
and
ON
pos;·
tions without the
use of
the
key.
3
STARTING
1. Place transmission in
Neutral position.
2.
COLD ENGINE-Depress
accelerator pedal half
way, pull choke knob
fully
out,
and release
pedal.
WARM
ENGINE-Depress
accelerator pedal half
way and hold
.
3. Turn ignition switch to ON, Release switch and accel-
erator pedal as soon a
s
engine
starts,
4. Adiust the choke position to obtain smooth engine
operation
.
As
soon
as engine
will
run
smoothly with-
out the choke
,
push the choke knob fully in
.
NOTE:
The
engine
may
be run at
fast idle speed without
choking,
if desired
,
by pulling the choke knob out
up to the first third of its
travel.
MANUAL CHOKE
Your Corvoir is equipped with a manual choke
designed to give you full control of the vital function of
engine choking
.
Since the choke operates to enrich the

Advertisement

loading

This manual is also suitable for:

Corvair 95 greenbrier sportswagonCorvair 95 corvan