Follow the steps as indicated below:
1
Brewing group in the beginning.
4
Remove the net filter and the gasket
completely.
7
Insert the net filter into the gasket.
10
Therefore, move the filter holder
until the net filter is locked firmly
into the gasket.
The machine can be used again, as described at page 14 of the instruction manual.
Instruction manual BARISTA · BARISTA PROFI
2
Use a flat screwdriver to lever out the
net filter and the group gasket.
5
Keep the new spare parts ready at
hand (the chamfered side of the
group faced upwards to the brewing
group).
8
Take the filter holder without filter.
11
Now you can easily lock the filter
holder into place.
19
3
The net filter and the gasket are now
nearly removed.
6
Clean the group with a brush.
Lock the net filter firmly into the
gasket.
9
Clamp the filter holder to the group.
12
The group is ready for use.
E NGLISH