Advertisement

IMAC 4000
OIL
US
USER MANUAL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IMAC 4000 OIL US and is the answer not in the manual?

Questions and answers

Summary of Contents for THERMOBILE IMAC 4000 OIL US

  • Page 1 IMAC 4000 USER MANUAL...
  • Page 2 40.020.950 - rev. 01 - 2019 IMAC 4000 US...
  • Page 3 IMAC 4000 US 40.020.950 - rev. 01 - 2019...
  • Page 4 Language English...........5 40.020.950 - rev. 01 - 2019 IMAC 4000 US...
  • Page 5: Table Of Contents

    Lifting instructions (Fig. 2) A Lifting hooks B Shafts for lifting using a fork-lift truck Warning Do not use any unsuitable material for lifting the convector heater. IMAC 4000 OIL US 40.020.950 - rev. 01 - 2019...
  • Page 6: Introduction

    S Hot-air outlet - 2: Fan high speed T Armature nut - 3: Fan low speed; burner low - 4: Fan high speed; burner low - 5: Fan high speed; burner high 40.020.950 - rev. 01 - 2019 IMAC 4000 OIL US...
  • Page 7: Preparations

    • Air-supply hose (diameter 500 or 600 mm) • Air-inlet panels (diameter 500 or 600 mm) • Hot air outlets (diameter 2 x 600 mm or 3 x 500 mm) IMAC 4000 OIL US 40.020.950 - rev. 01 - 2019...
  • Page 8: Use

    6. Remove the fuel connection. to the HIGH position. The convector heater will produce heat after some minutes. This depends on the outside temperature. 40.020.950 - rev. 01 - 2019 IMAC 4000 OIL US...
  • Page 9: Maintenance

    Caution damage to the burner room. Tension the V-belts according to the 3. Close the valve of the fuel supply. table. 4. Disconnect the power plug. IMAC 4000 OIL US 40.020.950 - rev. 01 - 2019...
  • Page 10: Faults

    Reset the thermostat. See fig. 5 User filter is closed. (B). The fuel tank is empty. Open up the drain tap to drain User the condensate and fill the tank. 40.020.950 - rev. 01 - 2019 IMAC 4000 OIL US...
  • Page 11 Dealer heater burns been set correctly. according to the manufacturer’s intermittently. specifications. The burner is The air inlet has not been Set the air inlet. Dealer producing soot. correctly set. IMAC 4000 OIL US 40.020.950 - rev. 01 - 2019...
  • Page 12: Spare Parts

    See for technical specifications table C in the flue should be at least 1000 mm. appendix of this manual. 2. Place a rain cover (A) on the end of the flue. 40.020.950 - rev. 01 - 2019 IMAC 4000 OIL US...
  • Page 13 Two-way outlet IMAC 4000 Diameter 600 mm 9.5 Diameters of air-inlet hoses Inlet IMAC 4000 Diameter 500 or 600 mm 9.6 Room thermostat Refer to the instructions of the thermostat. IMAC 4000 OIL US 40.020.950 - rev. 01 - 2019...
  • Page 14 English Date Description: Maintenance or Failure Action by 40.020.950 - rev. 01 - 2019 IMAC 4000 OIL US...
  • Page 15 English Date Description: Maintenance or Failure Action by IMAC 4000 OIL US 40.020.950 - rev. 01 - 2019...
  • Page 16 English IMAC 4000 Fuel filter 41.520.031 Nozzle Electrodes block Set of V-belts 41.740.318 2xSPA 2240LW 40.020.950 - rev. 01 - 2019 IMAC 4000 OIL US...
  • Page 17 • ρ (15 °C): 0.85 kg/dm3 • Hi = 42.689 MJ/kg • Hs = 45.5 MJ/kg • 1 kW = 860 kcal/h • 1 kW = 3413 Btu/h • 1 kW = 3.6 MJ/h IMAC 4000 OIL US 40.020.950 - rev. 01 - 2019...
  • Page 18 40.020.950 - rev. 01 - 2019 IMAC 4000 US...
  • Page 19 © 2013 Thermobile Industries B.V. All rights reserved. The available information has been prepared to a high level of care, but Thermobile Industries B.V. cannot be held liable for possible errors in the information or the consequences thereof. The information provided herein may not be reproduced and/or published in any form, by print,...
  • Page 20 THERMOBILE INDUSTRIES BV Konijnenberg 80 4825 BD Breda Nederland Postbus 3312 4800 DH Breda Nederland Bedrijfsnummer: 3502 T +31 (0)76 587 34 50 F +31 (0)76 587 27 89 info@thermobile.com www.thermobile.com 40.020.950 - REV. 01 - 2019...

Table of Contents