Troubleshooting - Wells H33 Owner's Manual

SYMPTOM
Hotplate won't heat
One or more sections won't
heat
Hotplate not hot enough
POSSIBLE CAUSE
Not plugged in, damaged plug or cord
or circuit breaker tripped
Temperature control not on
Damaged temperature control,
element or other internal component
Temperature control not set
Operating 208/240V unit at 120V
Damaged temperature control,
element or other internal component
NOTE: There are no user serviceable components in this appliance.
In all cases of damage or component malfunction, contact your
Authorized Wells Service Agency for repairs.
7

TROUBLESHOOTING

SUGGESTED REMEDY
Check plug and cord
Check / reset circuit breaker
Turn temperature control to
desired setting
Contact Authorized Wells Service
Agency for repairs
Adjust for desired temperature
Be sure supply voltage matches
nameplate voltage
Contact Authorized Wells Service
Agency for repairs