golmar Stadio Plus T3301ML Instruction Manual page 18

32 33
First of all we would like to thank and congratulate you for the purchase of this product
manufactured by Golmar.
The commitment to reach the satisfaction of our customers is stated through the ISO-9001
certification and for the manufacturing of products like this one.
Its advanced technology and exacting quality control will do that customers and users enjoy with
the legion of features this system offers. To obtain the maximum profit of these features and a properly
wired installation, we kindly recommend you to expend a few minutes of your time to read this manual.
Stand alone access control module with numeric keypad.
12Va.c. and 18Vd.c. inputs, with 12Vd.c. battery input without charge management.
Possibility to be combined with any of the 'Stadio Plus' system installations.
2 output relays of 8 activation codes each and independent panic code.
4, 5 or 6 digits programmable codes.
Relay 1: n/c or n/o, single shoot or stable software programmable (60W maximum load).
Relay 2: single shoot with three contacts (n/c or n/o with 60W maximum load).
Programmable activation time from 1 to 20 seconds on single shoot mode.
After introduction of three consecutive wrong codes, in a period of less than 15 seconds, the
access control is disabled during 3 minutes. After this time, if 3 consecutives wrong codes are
introduced again, the disabled time is doubled up to a maximum of 12 minutes.
INSTALLATION WITH 'STADIO PLUS' PANELS
When combined on 'Stadio Plus' door panels, follow the assembly instructions supplied with the
door panel and override the content of pages 34 and 35 of this manual. Wire and program the
access control module as it's explained in this instructions manual.
Introdution .........................................33
System characteristics ..........................33
Installation with 'Stadio Plus' panels ........33
Index .................................................33
Module installation......................34 to 35
Power supply installation.......................35
Module description..............................36
Module programming..............................
Programming methodes ....................36
INTRODUCTION
SYSTEM CHARACTERISTICS
INDEX
Enter and exit from programming ........37
Programming structure and sequence ..37
Function fields and values ..........38 to 41
Duplicated codes..............................41
Lock release installation .......................42
Installation diagrams ...............................
Combined on 'Stadio Plus' panels ...42 a 43
Stand alone operation .......................44
Quick programming guide ...................45