Cd Play; Playing A Cd - Philips ACT7582/05 User Manual

CD PLAY

Playing a CD

1 Unfasten the buckle.
2 Open the CD lid.
3 Insert an audio CD, printed side up, by pressing
gently on the CD centre so that it fits onto the hub.
Close the lid by pressing it down on the left side.
4 Press 2; to switch the set on and start playback.
The current track number and the elapsed
y
playing time of the current track are displayed.
• You can interrupt playback by pressing 2;.
The time where playback was interrupted
y
starts to flash.
• Continue playback by pressing 2; again.
5 Press 9 to stop playback.
The total number of tracks and the total playing
y
time of the CD are displayed.
6 Press 9 again to switch off the set.
7 To remove the CD, hold it by its edge and press the
hub gently while lifting the CD.
Notes: – Playback will stop if you open the CD lid.
– If there is no activity for 10 seconds, the set
will switch off automatically.
10
0