4 Play
Play CD
1
Press SOURCE repeatedly to select [CD]
source.
2
Press down to open the CD compartment.
3
Insert a disc with the printed side facing up,
then close the CD compartment.
» Play starts automatically.
Play from USB devices
Note
•
Make sure that the USB device contains playable audio
content.
1
Press SOURCE repeatedly to select
[USB] source.
2
Insert the USB device into the
» Play starts automatically. If not, press
8
EN
Play from Bluetooth devices
•
Make sure that your Bluetooth device is compatible
with this product.
•
Before pairing a device with this product, read its user
manual for Bluetooth compatibility.
•
Make sure that Bluetooth function is enabled on your
device, and your device is set as visible to all other
Bluetooth devices.
•
The product can memorize a maximum of four paired
devices. The fifth paired device will replace the first one.
•
Any obstacle between this product and a Bluetooth
device can reduce the operational range.
•
Keep away from any other electronic device that may
cause interference.
•
The operational range between this speaker and a
Bluetooth device is approximately 10 meters (30 feet).
1
2
3
socket.
4
.
Note
Press SOURCE repeatedly to select
[BLUETOOTH] source.
» [PAIRING] begins to flash.
On your Bluetooth device, enable
Bluetooth and search for Bluetooth devices
(refer to the user manual of the device).
Select [Philips PX8] on your device for
pairing. If necessary, enter default password
"0000".
Philips PX8
» After successful pairing and connection,
the product beeps twice, and
[Connected] is displayed.
Play audio on the Bluetooth device.
» Audio streams from your Bluetooth
device to the speaker.
» To pause play, press
» To skip to the previous or next track,
press
/
.
.