Hardware Contents; Assembly Instructions - Broil King 06695007 Operator's Manual

Part
AA
BB
CC M6 Flat Washer
DD M6 Lock Washer
EE M4 Flat Washer
FF M4 Lock Washer
GG
HH
Hardware listed above is not scaled to exact size.
(A screwdriver is required on assembly and is included for your convenience).

Assembly Instructions

Remove all contents from the carton packaging. Make
sure all parts are present before attempting assembly.
Once the grill is fully assembled, go back and check to
make certain all the bolts are secure. Tighten again using
the screwdriver provided if necessary.
Estimated Assembly Time: 45 minutes.
Step 1 (Casters assembly)
a) Align the hole on one the two swivel casters (U) with the
holes on left bottom side of the cart base (A).
b) Insert a M6 x 15 bolt (AA), one M6 lock washer (DD)
and one M6 flat washer (CC) into each pre-drilled hole
and tighten by hand.
Repeat the procedure with the two rigid casters (V) and
c)
the holes on right bottom side of the bottom panel
Tighten two bolts using the screwdriver provided.
d)
Note: Before beginning assembly, make certain the two
swivel casters are locked.
GSS2520JAN
Instruction Manual
Guide d'utilisation

Hardware Contents

Description
M6 x 15 Bolt
M4 x 10 Bolt
M4 Nut
Screwdriver
Quantity
32 PCS
9 PCS
24 PCS
24 PCS
6 PCS
4 PCS
4 PCS
1 PC
7
Picture