Page 1
USERʼS MANUAL Model No. WLIVEL14718.0 Serial No. ___________ serial no. CUSTOMER SERVICE UNITED KINGDOM Call: 0330 123 1045 From Ireland: 053 92 36102 Website: www.iconsupport.eu E-mail: csuk@iconeurope.com Write: ICON Health & Fitness, Ltd. Unit 4, Westgate Court, Silkwood Park, OSSETT...
IMPORTANT PRECAUTIONS WARNING : To reduce the risk of serious injury, read all important precautions and instructions in this manual and all warnings on your elliptical before using your elliptical. ICON assumes no responsibility for personal injury or property damage sustained by or through the use of this product.
The model number is WLIVEL14718.0 and the location of the For your benefit, read this manual carefully be- serial number decal is under the main frame.
ASSEMBLY Assembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. In addition to the included tool(s), assembly requires a Phillips screwdriver and an adjustable wrench. As you assemble the exercice bike, use the drawings below to identify small parts.
Page 6
STEP 1 Attach the Front bottom tube (2) and Rear bottom tube (3) onto the Main frame (1) with Square neck bolt (9), Arc washer (11), Acorn nut (12) as shown. STEP 2 Connect Extension wire (44) well with Sensor wire (43).
Page 7
STEP 3 1. Fix Right Swing arm (6R) onto the long axis of Handlebar post (4) with Hex bolt (33), Spring washer (51), Flat washer (34), Wave washer (25) and Long axis (39). Don’t lock it. 2. Fix the Right Connecting rod (5R) on the Crank (14) with Right Pedal bolt (26R), Wave washer (25), Spring washer (15) and Nylon nut (16R).
Page 8
Step 4 : Fix the Handlebar (53) on the Handlebar post (4) with the Inner hex round head bolt(56), Spring washer(55), Flat washer(54) ,then cover the Handlebar clamp(57). Step 5: Fix the Right Handlebar (7R) onto the Right Swing arm (6R) with Square neck bolt (35), Arc washer (36) and Acorn nut (37) as shown.
HOW TO USE THE ELLIPTICAL HOW TO EXERCISE ON THE ELLIPTICAL EXERCISER To mount the elliptical exerciser, hold the upper body arms and step onto the pedal that is in the lowest position. Then, step onto the other pedal. Push the pedals until they begin to move with a continuous motion.
MAINTENANCE AND TROUBLESHOOTING Inspect and tighten all parts of the elliptical regularly. place two SIZE-AAA (UM-4) batteries into battery Replace any worn parts immediately. housing on back of monitor. Insure that the batteries To clean the elliptical, use a damp cloth and a small are correctly positioned and battery springs are in amount of mild detergent.
CONSOLE FEATURES HOW TO USE THE CONSOLE Make sure that the console has batteries (see page MAINTENANCE AND TROUBLESHOOTING). If there is a sheet of clear plastic on the face of the console, remove it. 1. Turn on the console To turn on the console, press any button on the console or simply begin pedaling.
Page 12
EXERCISE GUIDELINES Burning Fat—To burn fat effectively, you must exer- WARNING: cise at a low intensity level for a sustained period of time. During the first few minutes of exercise, your Before beginning this or any exercise pro- body uses carbohydrate calories for energy. Only af- gram, consult your physician.
PART LIST—Model No. WLIVEL14718.0 Key No. Qty. Description Key No. Qty. Description Main frame Cross pan head screw Front bottom tube Console Bracket Rear bottom tube Console Handlebar post Spring washer 5L/R Left/Right Connecting rod 6L/R Left/Right Swing arm Handlebar...
ORDERING REPLACEMENT PARTS To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to provide the following information when contacting us: • the model number and serial number of the product (see the front cover of this manual) •...
Need help?
Do you have a question about the WLIVEL14718.0 and is the answer not in the manual?
Questions and answers