Preliminary Recommendations; Receiving Inspection; Storage; Disposal And Recycling - WEG X1000 Installation And Operation Manual

www.weg.net
1. TERMINOLOGY
Sensor - In this manual, the term "sensor" refers to the WEG Motor Scan device - smart device to monitor
motor characteristics.
IoT (Internet of Things) – It is defined as the technology that allows machine-to-machine (M2M)
communication over the internet for the sharing of data and information for predefined purposes.
App – Mobile app.
Gateway – Intermediate equipment that uses internet resources to connect the Sensor to the WEG IoT
platform. In this manual, the term "gateway" refers to the Gateway X1000 device.
Bluetooth – Wireless technology that interconnects and allows the transmission of data between computers,
mobile phones and other devices through radio waves.
Ethernet - Ethernet is an interconnect architecture for local area networks - Local Area Network (LAN).
PoE – It is the abbreviation for Power Over Ethernet, which is a technology that allows the transmission of
electricity through the cables of an Ethernet network.
Hotspot – It is the name of a particular place where a wireless network (Wi-Fi technology) is available for use.
Firmware – It is the set of operating instructions programmed directly into the hardware of an electronic device.
It contains the initialization information that allows the device to function properly.
2. SAFETY WARNINGS IN THE MANUAL
The following safety notices are used in this manual:
DANGER!
Failure to comply with the procedures recommended in this warning may lead to death, serious injuries
and considerable material damages. It may also void the warranty.
ATTENTION!
Not following the procedures recommended in this warning may cause material damages.
NOTE!
Important information for the complete understanding and proper operation of the product.

3. PRELIMINARY RECOMMENDATIONS

This manual contains the necessary information for the correct installation, setup and use of the Cassia X1000
gateway with the WEG Motor Scan sensor (smart monitoring device for motor characteristics).
It was developed to be used by people with proper technical training or qualification to operate this kind of
equipment.
Failure to comply with the product instructions may cause operating accidents, damages to the environment, to
the device, in addition to voiding the warranty.
The user is responsible for the correct definition of the installation environment and application characteristics.
During the warranty period of Gateway X100, all repair, overhaul and reclamation services must be carried out
by WEG authorized Service Centers to maintain validity of the warranty.
NOTE!
Follow the installation instructions described in chapters 3, 4 and 5.
22

Gateway X1000

NOTE!
Read the whole manual before installing or operating the Gateway.
DANGER!
Only qualified people familiar with the Gateway should plan or execute the installation, operation and
maintenance of this device.
Such personnel must follow the safety instructions described in this guide and/or defined by local regulations.
Failure to comply with the safety instructions may lead to death and/or damages to the Gateway.

3.1. RECEIVING INSPECTION

At the receipt of the Gateway Cassia X1000, check that the packaging contains the following items: 1 Gateway
X1000, 4 screws/bushings, 2 clamps, 1 Quick Guide, 1 Silicone plug set, 1 PoE Power Supply, 1 Ethernet
cable and 1 Bracket. Check the Gateway immediately after unpacking to identify possible damages occurred
due to improper transportation.
Guia Rápido de Instalação
1x Gateway X1000
Guia Rápido de Instalação
4x Screws/Bushings
Figura 3.1 - Gateway e seus componentes
DANGER!
All damages must be reported in writing to the transportation company, to the insurance company and
to WEG. Failure to comply with such procedures will void the product warranty.

3.2. STORAGE

NOTE!
It is recommended to store the gateway at a maximum temperature of 70 °C and not exposed to direct
sunlight.

3.3. DISPOSAL AND RECYCLING

WEG is committed to the environment and supplies products that contribute to reducing the environmental
impacts along their life cycle. The user's participation in the waste sorting and recycling of the electro-electronic
devices is also important to minimize their potential impact on the environment and human health.
The proper disposal of the Gateway, observing the applicable laws, is very important for your safety and also of
the environment, in addition to helping save resources.
ATTENTION!
For information on the return or collection for the proper disposal and recycling of the product, contact
WEG or send the gateway to one of our authorized service centers.
The gateway should not be disposed of with household, commercial or industrial waste. They cannot be
disposed of in incinerators and city landfills either. The gateway must be disposed of in compliance with the
local regulations.
www.weg.net
2x Clamps 1x PoE Power Supply
Guia Rápido de Instalação
Guia Rápido de Instalação
1x Quick guide 1x Ethernet cable
Guia Rápido de Instalação
1x Bracket
1x Silicone plug set
Guia Rápido de Instalação
Gateway X1000 23