Extech Instruments 407790A User Manual page 26

1. Press the MENU button to enter the menu list screen.


-
+
2. Use the /


-
+
3. Use the /
button.


-
+
4. Use the /


-
+
5. Use the /
button.


-
+
6. Use the /


-
+
7. Use the /


-
+
8. Use the /


-
+
9. Use the /
button.
Note: For LEVEL 2 trigger, ignore the slope setting and only use the Slope+ trigger.
10. Press the MENU button to return to the measurement screen.
11. Press the R button on the meter to start automatic recording. The meter will start
recording when the trigger level is exceeded.
buttons to select "K) . Trigger" then press the  button.
button to select the desired option "LEVEL1" or "LEVEL2" then press the 
buttons to select "1) . Trigger LEVEL" then press the  key.
buttons to set the desired trigger level value (25 to 130). Then press the 
buttons to select "2) . Trigger Band" then press the  button.
buttons to select the desired trigger band then press the  button.
buttons to select "4) . Slope Type" then press the  button.
buttons to select the desired trigger slope + or Slope-. Then press the 
26
AP
AP
407790A-EN_V2.4 1/20