Table of Contents
Advertisement
3.4 Sub Channel Settings
To access the sub menu setting press the following buttons.
1. Press the MENU button to enter the menu list screen.
+
2. Use the
/
+
3. Use the
/
F, S, τ (10ms) or I (Impulse 35ms), then press button.
+
4. Press the
+
5. Press the
button.
6. Press MENU button to return to the measurement screen.
Note: There is no frequency analysis function for the sub channel. Only the all - pass value is
measured.
-
buttons to select "G). Sub Time Weight" then press button.
-
button to select the desired time weighting
-
buttons to select "H). Sub Freq Weight" then press button.
/
-
buttons to select the desired frequency weighting A, C or Z, then press
/
18
407790A-EN_V2.4 1/20
Advertisement
Table of Contents
Need help?
Do you have a question about the 407790A and is the answer not in the manual?
Questions and answers