Keurig K-3500 Use & Care Manual page 10

Helpful Hints
Water quality varies greatly. If you notice an undesirable
taste in your beverage (such as chlorine or mineral tastes),
we recommend using bottled or filtered water. Do not use
distilled water.
A Rinsing Brew refers to running a hot water cycle with no
use of K-Cup® pods. Rinsing brews help to rinse clean the
brewer's internal parts. Run a rinsing brew immediately
after using pods with hot cocoa or milk ingredients. If the
brewer is not used daily, run a rinsing brew before brewing
with a K-Cup® pod.
Service
Beyond these recommended cleaning and maintenance
procedures, this brewer is not user serviceable. For service,
please refer to the Warranty section of this guide.
Storage
Drain the water tank before storing or transporting and
take care to ensure that you store your brewer in a safe and
frost free environment. Please be sure to store your brewer
in its upright position to avoid water leakage from the inner
tank. If you store the brewer in a cold environment, you run
the risk of water freezing inside the brewer and causing
damage. When you prepare to use it after storage, we
recommend running three rinsing brews without a K-Cup
pod.
If you plan to move your brewer to a different location, turn
the brewer off, unplug it, and drain the water tank. If your
brewer has been in an environment below freezing, please
be sure to let it warm to room temperature for at least 2
hours before using.
Click or Call!
Have Questions?
We're here to help. Visit commercial.keurig.com for step-by-step
videos on cleaning, descaling, and more.
Open Source Compliance
For information on the open source compliance for this brewer,
please visit https://commercial.keurig.com/compliance
®
Still Need Help?
Give us a call at
1-888-287-BREW (2739) ext. 5