Electrolux ESL8350RO User Manual page 10

10 www.electrolux.com
German de‐
grees (°dH)
29 - 36
23 - 28
19 - 22
15 - 18
11 - 14
4 - 10
<4
1) Factory setting.
2) Do not use salt at this level.
Regardless of the type of detergent
used, set the proper water hardness
level to keep the salt refill indicator
active.
Multi-tabs containing salt are
not effective enough to
soften hard water.
How to set the water softener
level
Make sure the appliance is in user mode.
1. Press
• The indicators
are off.
• The indicator
• The display shows the current
setting: e.g.
2. Press
setting.
3. Press on/off to confirm the setting.
6.3 The rinse aid empty
notification
The rinse aid helps to dry the dishes
without streaks and stains. It is
automatically released during the hot
rinse phase.
When the rinse aid chamber is empty,
the rinse aid indicator is turned on
French de‐
grees (°fH)
51 - 64
40 - 50
33 - 39
26 - 32
19 - 25
7 - 18
<7
.
, ,
still flashes.
= level 5.
repeatedly to change the
mmol/l
5.1 - 6.4
4.0 - 5.0
3.3 - 3.9
2.6 - 3.2
1.9 - 2.5
0.7 - 1.8
<0.7
notifying to refill rinse aid. If the drying
results are satisfactory while using multi-
tablets only, it is possible to deactivate
the notification for refilling rinse aid.
However, for best drying performance,
always use rinse aid.
If standard detergent or multi-tablets
without rinse aid are used, activate the
notification to keep the rinse aid refill
indicator active.
How to deactivate the rinse aid
empty notification
Make sure the appliance is in user mode.
and
1. Press
• The indicators
are off.
• The indicator
• The display shows the current
setting.
2. Press
3. Press on/off to confirm the setting.
6.4 The rinse aid level
It is possible to set the released quantity
of rinse aid between level 1 (minimum
Clarke de‐ Water softener
grees
36 - 45
28 - 35
23 - 27
18 - 22
13 - 17
5 - 12
< 5
.
,
still flashes.
– = the rinse aid empty
notification is deactivated.
– = the rinse aid empty
notification is activated.
to change the setting.
level
7
6
1)
5
4
3
2
2)
1
, and