IKEA MATMASSIG Manual page 36

ENGLISH
Problem
lights up on the power
setting display.
symbol plus a number
appears on the timer dis-
play.
lights up on the timer
display, after activating the
appliance.
lights up on the timer
display.
lights up on the timer
display.
Possible cause
Unsuitable cookware.
No cookware on the cooking
zone.
The diameter of the bottom
of the cookware is too small
for the cooking zone.
Electronic component error.
The electrical connection is
incorrect.
Overheating protection for
the cooking zone operates.
The electrical connection is
incorrect. The hob is connec-
ted to one phase only.
Electronics may be dam-
aged.
Remedy
Use suitable cookware.
Place cookware on the cook-
ing zone.
Move onto a smaller cooking
zone.
Disconnect the appliance
from the electrical supply for
a few minutes. Remove the
fuse, wait one minute, and
insert the fuse again. If the
problem continues, ensure a
correct installation by calling
an authorised installer.
Check if the appliance is cor-
rectly connected to the elec-
trical supply. Ensure a cor-
rect installation by calling an
authorised installer.
Deactivate the appliance.
Remove the hot cookware.
After approximately 30 sec-
onds activate the cooking
zone again. should dis-
appear, residual heat indi-
cator can stay. Cool down
the cookware and check it
with the section "Cookware
for the induction cooking
zones".
Check if the appliance is cor-
rectly connected to the elec-
trical supply. Ensure a cor-
rect installation by calling an
authorised installer.
Contact your IKEA store call
centre.
36