Real Franklin Autoswing Installation Manual page 10

Installation Manual
Franklin Autoswing Installation Manual
ra�on Mode
Franklin Autoswing Installation Manual
Manual Opera�on Mode
Manual Opera�on Mode
c�on, manual opera�on mode can be carried out
Manual Operation Mode
onalized key.
case of power failure or operator malfunc�on, manual opera�on mode can be carried out
In the case of power failure or operator malfunction,
ning the external release knob with personalized key.
e case of power failure or operator malfunc�on, manual opera�on mode can be carried out
manual operation mode can be carried out
by turning the external release knob with a Franklin Autoswing Installation Manual
rning the external release knob with personalized key.
utside
Outside
personalized key.
Inside
Le� Motor
I n the case of power failure or operator malfunc�on, manual opera�on mode can be carried out
side
by turning the external release knob with personalized key.
EFT motor
(as viewed from inside):
n key clockwise Le� Motor
n release knob counter‐clockwise
n key back to keep in release posi�on
Left Door (as viewed from inside)
sh/pull door slowly to open or close
F or RIGHT motor (as viewed from inside):
verse steps to re‐ac�vate auto‐mode
LEFT motor
1. Turn key clockwise
(as viewed from inside):
Le� Motor
1. Turn key clockwise
2. Turn release knob counter-clockwise
urn key clockwise
2. Turn release knob clockwise
urn release knob counter‐clockwise
F or LEFT motor
(as viewed from inside):
3. Turn key back to keep in release posi�on
3. Turn key back to keep in release position
urn key back to keep in release posi�on
1. Turn key clockwise
4. Push/pull door slowly to open or close
ush/pull door slowly to open or close
2. Turn release knob counter‐clockwise
4. Push/pull door slowly to open or close
everse steps to re‐ac�vate auto‐mode 5. Reverse steps to re‐ac�vate auto‐mode
3. Turn key back to keep in release posi�on
4. Push/pull door slowly to open or close
5. Reverse steps to re‐ac�vate auto‐mode
5. Reverse steps to re-activate
auto-mode
Right Door (as viewed from
inside)
1. Turn key clockwise
hen working with limit switches, the
ot be used to manually release motor.
2. Turn release knob clockwise
e, ip the black lever (pictured at
d swing the door. The lever must be
3. Turn key back to keep in release
wn while swinging as it is spring loaded.
position
4. Push/pull door slowly to open or
close
N OTE: When working with limit switches, the
5. Reverse steps to re-activate auto-mode
key cannot be used to manually release motor.
To release, ip the black lever (pictured at
Note: When working with limit switches, the key
right) and swing the door. The lever must be
When working with limit switches, the
held down while swinging as it is spring loaded.
not be used to manually release motor.
ase, ip the black lever (pictured at
nd swing the door. The lever must be
6
wn while swinging as it is spring loaded.
Page 10
TM
TM
TM
Outside
Manual Opera�on Mode
Right Motor
Inside
F or RIGHT motor (as viewed from inside):
Right Motor
Outside
1. Turn key clockwise
2. Turn release knob clockwise
3. Turn key back to keep in release posi�on
4. Push/pull door slowly to open or close
Inside
5. Reverse steps to re‐ac�vate auto‐mode
F or RIGHT motor (as viewed from inside):
1. Turn key clockwise
2. Turn release knob clockwise
F or RIGHT motor (as viewed from inside):
3. Turn key back to keep in release posi�on
1. Turn key clockwise
4. Push/pull door slowly to open or close
2. Turn release knob clockwise
5. Reverse steps to re‐ac�vate auto‐mode
3. Turn key back to keep in release posi�on
4. Push/pull door slowly to open or close
5. Reverse steps to re‐ac�vate auto‐mode
© 2012 Copyright Real Carriage Door Company, Inc
© 2012 Copyright Real Carriage Door Company, Inc
Igea Motor Installation
cannot be used manually to release the motor. To
release, flip the black lever (pictured) and swing the
door. The lever must be held down while swinging
as it is spring loaded.
Motor Cover Install
1. Hold the cover over the motor, with the front
of the cover angled toward you. Rock the cover
rearward (fig. 7) until the cover is seated. The cover
must be installed in this way so that the Manual
Operation cam engages properly with motor (fig 8).
2. Test the manual release mechanism as
Right Motor
described in "Manual Operation Mode."
1. Hold the cover over the motor, with the front of the cover angled toward you. Rock the cover rearward (g. 7) u
the cover is seated. The cover must be installed in this way so that the Manual Opera�on cam engages properly
NOTE:
with motor (g 8).
you turn the knob located on the motor cover then
Right Motor
you need to do some adjusting. Please visit our
2. Test the manual release mechanism as described in "Manual Opera�on Mode."
website to download the instructions or give us a
3. Fasten the cover with the 4 screws provided (g. 9). call at 1-800-694-5977
LEFT MOTOR CAM
© 2012 Copyright Real Carriage Door Company, Inc
Fig 8. Manual Opera�on Cams
© 2012 Copyright Real Carriage Door Company, Inc
14
Franklin Autoswing Installation Manual
TM
Installing the Motor Cover
If your manual release does not work when
Fig 7. Sea�ng the cover
RIGHT MOTOR CAM
Fig 9. Securing the cover
© 2012 Copyright Real Carriage Door Compan