Installing The Speaker/ Microphone Or Headset - Kenwood ProTalk DIGITAL TK-3701D User Manual

INSTALLING THE SPEAKER/ MICROPHONE OR HEADSET

Note:
◆ The transceiver is not fully water resistant when using a speaker/ microphone or
headset.
◆ Use the Phillips #1 screwdriver.
Insert the speaker/ microphone plugs into the
1
speaker/ microphone jacks of the transceiver.
Place the locking bracket over the speaker/
2
microphone plugs so that the locking tabs insert
into the transceiver grooves.
Secure the locking bracket in place using the
3
attached screw.
Speaker/ microphone
locking bracket
6
Screw